Redmi Note 8 Pro / Oppo F11 V-Cut Display Safety Glass Guide

Redmi Note 8 Pro and Oppo F11 are equipped with a classic waterdrop (V-cut) front camera design, which makes display protection selection slightly different from punch-hole models. In such displays, proper fit depends on choosing V-Cut Display Safety Glass that matches not only the screen size but also the camera cut position and bezel flow. This guide is created to help users and retailers identify accurate protection based on display structure, not guesswork.

---

Note: If you’re here only to check whether your mobile model is compatible with this tempered glass, you can

jump directly to the compatible model list below.

Waterdrop (V-Cut) Display With Front Camera Cut Safety Glass

Both models use a V-cut waterdrop camera layout, where the front camera sits below the top edge of the display. Because of this structure, front camera cut safety glass is required for correct alignment. When the V-cut is positioned accurately, the camera remains fully functional, while the rest of the display stays evenly protected. As a result, users experience clear selfies, stable fitting, and a balanced front appearance.

---

Size and Bezel Compatibility Explained

For Redmi Note 8 Pro and Oppo F11, the commonly suitable safety glass size is approximately:

• Length: 6.53 inches
• Width: 2.69 inches

However, matching size alone is not enough. Bezel thickness and edge curvature also influence how the V-cut safety glass settles on the phone.

Why Bezel Matching Is Important for V-Cut Displays

On waterdrop displays, even small bezel differences can shift the camera cut slightly off-center. Over time, this may lead to uneven edges or lifting, especially after a phone cover is installed. Therefore, for V-Cut Display Safety Glass, correct bezel alignment works together with size to ensure long-term stability and better user satisfaction.

---

Suitable for Retailers, Repair Shops, and End Users

This V-cut safety glass format is suitable for:

• Retailers stocking multiple waterdrop-display smartphones
• Repair shops helping customers replace broken front protection
• End users who want correct camera alignment with daily-use reliability

Understanding V-cut positioning reduces fitting errors and unnecessary replacements.

---

Usage Care and Replacement Cycle

For optimal results:

• Clean the display thoroughly before installation
• Apply the safety glass in a low-dust environment
• Avoid pressing directly around the V-cut area

For regular usage, replacing the safety glass every 120–150 days is recommended, or sooner if cracks, scratches, or edge lifting appear. Regular replacement helps maintain display clarity and hygiene.

---

📱 Compatible Model List – Redmi Note 8 Pro / Oppo F11

This Front Camera Cut Display Safety Glass is suitable for Redmi Note 8 Pro, Oppo F11, and Oppo A9 smartphone models that share similar display size, waterdrop camera design, and bezel structure.