Google Pixel 6 comes with a modern punch hole display, where the front camera is placed inside the active screen area instead of a notch. Because of this design, the correct protection choice is Uncut Screen Protector Glass, which covers the display uniformly without any front camera opening. This guide explains the logic behind uncut protection and how proper fitting depends on size, bezel, and display structure together.
Note: If you’re here only to check whether your mobile model is compatible with this tempered glass, you can
jump directly to the compatible model list below.
Punch Hole Display Structure Explained
The punch hole display used in Google Pixel 6 offers a clean and minimal front design. In this layout:
- The front camera is embedded within the display panel
- No external notch or top cut exists
- The screen surface remains visually continuous
Because of this integrated camera placement, a front camera cut is not required. Instead, uncut glass safely overlays the camera area without disturbing visibility or functionality.
Why Uncut Display Screen Glass Guard Works Best
For punch hole smartphones, Uncut Screen Protector Glass provides several practical advantages:
- Preserves the original display aesthetics
- Eliminates dust accumulation around cut edges
- Protects the camera area evenly
- Reduces stress points caused by incorrect cutouts
The camera remains fully functional due to the optical clarity of the glass, making uncut protection both safe and effective.
Display Size and Physical Compatibility
The commonly suitable protection size for Google Pixel 6 is approximately:
- Length: 6.40 inches
- Width: 2.68 inches
- Display Type: Punch Hole (Without Camera Cut)
However, size alone does not guarantee a perfect fit. Bezel width, edge curvature, and corner radius also influence how well the glass settles on the display.
Bezel Matching and Long-Term Stability
Even when length and width match, bezel mismatch can cause issues such as:
- Edge lifting after applying a phone cover
- Uneven pressure near corners
- Reduced adhesive life over time
Therefore, selecting uncut glass that aligns with the bezel structure and edge design ensures better grip, stability, and durability.
Suitable for Trade and End Users
This uncut protection format is suitable for:
- Retailers handling Google Pixel models
- Repair shops offering screen protection replacement
- End users who prefer a clean, factory-like display look
Understanding punch hole protection logic helps reduce incorrect fittings and unnecessary replacements.
Installation Care and Replacement Guidance
For best results:
- Clean the display thoroughly before application
- Align the glass carefully from top to bottom
- Press gently from the center outward
- Avoid excessive pressure near edges and corners
Recommended Replacement Cycle
For regular daily use, replacing the screen protector every 120–150 days is advisable, or earlier if cracks, scratches, or edge lifting appear.
📱 Compatible Model List – Google Pixel 6
This Uncut Screen Tempered Glass is suitable for Google Pixel 6 and other smartphones that share similar punch hole display design, screen size, and bezel structure.
👉 The detailed compatible model list is provided below.
Google Pixel 6
- Google Pixel 6